Advertentie | |
|
![]() |
||
Citaat:
maar op programma's te laten connecten ![]() bijvoorbeeld : Blubster Help Files l Troubleshooting When you open Blubster an the bottom centre of the application the text should quickly change from ?Connecting?? to ?Connected to the Blubster?. . If this does not happen you have not successfully configured Blubster. This can be remedied in many cases by doing one or both of these two actions: 1.- Turn off any firewall software that you currently have running. In the case of XP users this could be running without your knowledge. To stop this, follow these instructions: ? Right click on the network connections settings icon in the bottom right of your screen and left click on ?Open Network Connections? ? Right click on your current network connection icon and left click on ?Properties?. ? Left click on the tab marked ?Advanced? ? Uncheck the ?Internet Firewall Protection? box and click ?OK? ? You will now need to shut down Blubster and restart. You will also need to close your current Internet connection and re-connect for these changes to be applied. 2.- You may find that this does not solve the problem. If this is so then you may need to change your port configuration in your router settings. ? Protocol: UDP. ? Port: 41170 Action: Allow inbound traffic, redirect to your computer. --------------------------------------------------------------------------------------------- zoiets
__________________
Het is toch ons bier !?
Laatst gewijzigd op 31-03-2006 om 15:51. |
![]() |
||
Citaat:
The Virual Server settings allow you to provide public services to the public network, such as a web site, an e-mail server or an FTP server. The Virtual Server lets you redirect server requests from the public network to the computer that hosts the server. Please note that for hosting servers to the public network within your local network, the DHCP server of this router should be turned off and all clients within the LAN need to get a fixed IP address. When you are using the Virtual Server, then please be aware of the fact that you are opening ports from the public network to your LAN, thus making your LAN more vulnerable for unwanted 'visitors'. Please make sure that you only open the required ports and set up your servers for public services in the most secure way.
__________________
Ik ben nieuw
|
![]() |
||
Citaat:
__________________
"Bring me my monocle. I want to look rich."
|
![]() |
|
|