21-03-2003, 13:01
|
|
|
ik heb nu al enige tijd last van het probleem dat X windows niet op wil starten..
Heel vreemd.. ik krijg het logo in beeld te zien enzo van dat hij start, en daarna stopt hij gewoon alsof hij klaar is met laden  dacht eerst dat het aan de resolutie ofzo lag, maar dat is het ook niet.. iemand nog tips?
__________________
Napoleon, don't be jealous that I've been chatting online with babes all day | Ugh! Gross! Freakin' idiot!
|
| Advertentie | |
|
|
|
|
21-03-2003, 13:26
|
|
Verwijderd
|
Als hij naar de grafische modus switcht en er vervolgens weer uitvliegt, ligt het vaak aan iets anders.
Maak anders eens het bestand ~/.xinitrc aan, met daarin de regel "xterm". Blijft hij dan wel actief? Daarnaast zou het leuk zijn als je ons het XFree86 log zou kunnen geven (/var/log/XFree86.0.log).
|
|
21-03-2003, 13:38
|
|
|
ff opnieuw 'XFree86 -configure' doen? you never know
__________________
irc.lichtsnel.nl #linux
|
|
22-03-2003, 09:39
|
||
|
|
Citaat:
hier volgt het log: Code:
XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-72) / X Window System (protocol Version 11, revision 0, vendor release 6600) Release Date: 23 January 2002 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/) Build Operating System: Linux 2.4.18-11smp i686 [ELF] Build Host: daffy.perf.redhat.com Module Loader present OS Kernel: Linux version 2.4.18-14 (bhcompile@stripples.devel.redhat.com) (gcc version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #1 Wed Sep 4 13:35:50 EDT 2002 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Fri Mar 21 14:17:06 2003 (==) Using config file: "/etc/X11/XF86Config" (==) ServerLayout "Default Layout" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Videocard0" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Keyboard0" (**) Option "XkbRules" "xfree86" (**) XKB: rules: "xfree86" (**) Option "XkbModel" "pc105" (**) XKB: model: "pc105" (**) Option "XkbLayout" "us" (**) XKB: layout: "us" (==) Keyboard: CustomKeycode disabled (**) |-->Input Device "DevInputMice" (**) FontPath set to "unix/:7100" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (--) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.1 XFree86 Video Driver: 0.5 XFree86 XInput driver : 0.3 XFree86 Server Extension : 0.1 XFree86 Font Renderer : 0.3 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.3 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.2.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.5 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x80000060, mode1Res1 = 0x80000000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1106,0691 card 0000,0000 rev 44 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 1106,8598 card 0000,0000 rev 00 class 06,04,00 hdr 01 (II) PCI: 00:07:0: chip 1106,0596 card 1106,0000 rev 23 class 06,01,00 hdr 80 (II) PCI: 00:07:1: chip 1106,0571 card 0000,0000 rev 10 class 01,01,8a hdr 00 (II) PCI: 00:07:2: chip 1106,3038 card 0925,1234 rev 11 class 0c,03,00 hdr 00 (II) PCI: 00:07:3: chip 1106,3050 card 0000,0000 rev 30 class 06,00,00 hdr 00 (II) PCI: 00:0b:0: chip 10ec,8139 card 10ec,8139 rev 10 class 02,00,00 hdr 00 (II) PCI: 00:0d:0: chip 10ec,8139 card 1429,d010 rev 10 class 02,00,00 hdr 00 (II) PCI: 01:00:0: chip 5333,8a22 card 5333,8202 rev 02 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) LoadModule: "scanpci" (II) Loading /usr/X11R6/lib/modules/libscanpci.a (II) Module scanpci: vendor="The XFree86 Project" compiled for 4.2.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.5 (II) UnloadModule: "scanpci" (II) Unloading /usr/X11R6/lib/modules/libscanpci.a (II) Host-to-PCI bridge: (II) PCI-to-ISA bridge: (II) Host-to-PCI bridge: (II) PCI-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0c (VGA_EN is set) (II) Bus 1 I/O range: (II) Bus 1 non-prefetchable memory range: [0] -1 0xdc000000 - 0xddffffff (0x2000000) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0xd0000000 - 0xd7ffffff (0x8000000) MX[B] (II) Bus -1: bridge is at (0:7:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set) (II) Bus -1 I/O range: (II) Bus -1 non-prefetchable memory range: (II) Bus -1 prefetchable memory range: (II) Bus -1: bridge is at (0:7:3), (-1,-1,0), BCTRL: 0x08 (VGA_EN is set) (II) Bus -1 I/O range: [0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus -1 non-prefetchable memory range: [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus -1 prefetchable memory range: [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] (--) PCI:*(1:0:0) S3 Savage4 rev 2, Mem @ 0xdd000000/19, 0xd0000000/27 (II) Addressable bus resource ranges are [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] [1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0x00000000 - 0x000000ff (0x100) IX[B] (II) Active PCI resource ranges: [0] -1 0xdf001000 - 0xdf0010ff (0x100) MX[B] [1] -1 0xdf000000 - 0xdf0000ff (0x100) MX[B] [2] -1 0xd8000000 - 0xdbffffff (0x4000000) MX[B] [3] -1 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B) [4] -1 0xdd000000 - 0xdd07ffff (0x80000) MX[B](B) [5] -1 0x0000ec00 - 0x0000ecff (0x100) IX[B] [6] -1 0x0000e800 - 0x0000e8ff (0x100) IX[B] [7] -1 0x0000e400 - 0x0000e41f (0x20) IX[B] [8] -1 0x0000e000 - 0x0000e00f (0x10) IX[B] (II) Active PCI resource ranges after removing overlaps: [0] -1 0xdf001000 - 0xdf0010ff (0x100) MX[B] [1] -1 0xdf000000 - 0xdf0000ff (0x100) MX[B] [2] -1 0xd8000000 - 0xdbffffff (0x4000000) MX[B] [3] -1 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B) [4] -1 0xdd000000 - 0xdd07ffff (0x80000) MX[B](B) [5] -1 0x0000ec00 - 0x0000ecff (0x100) IX[B] [6] -1 0x0000e800 - 0x0000e8ff (0x100) IX[B] [7] -1 0x0000e400 - 0x0000e41f (0x20) IX[B] [8] -1 0x0000e000 - 0x0000e00f (0x10) IX[B] (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges: [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0xdf001000 - 0xdf0010ff (0x100) MX[B] [6] -1 0xdf000000 - 0xdf0000ff (0x100) MX[B] [7] -1 0xd8000000 - 0xdbffffff (0x4000000) MX[B] [8] -1 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B) [9] -1 0xdd000000 - 0xdd07ffff (0x80000) MX[B](B) [10] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] [11] -1 0x00000000 - 0x000000ff (0x100) IX[B] [12] -1 0x0000ec00 - 0x0000ecff (0x100) IX[B] [13] -1 0x0000e800 - 0x0000e8ff (0x100) IX[B] [14] -1 0x0000e400 - 0x0000e41f (0x20) IX[B] [15] -1 0x0000e000 - 0x0000e00f (0x10) IX[B] (II) LoadModule: "dbe" (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a (II) Module dbe: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.1 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "extmod" (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a (II) Module extmod: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.1 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension FontCache (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "fbdevhw" (II) Loading /usr/X11R6/lib/modules/linux/libfbdevhw.a (II) Module fbdevhw: vendor="The XFree86 Project" compiled for 4.2.0, module version = 0.0.2 ABI class: XFree86 Video Driver, version 0.5 (II) LoadModule: "glx" (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a (II) Module glx: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 ABI class: XFree86 Server Extension, version 0.1 (II) Loading sub module "GLcore" (II) LoadModule: "GLcore" (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a (II) Module GLcore: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 ABI class: XFree86 Server Extension, version 0.1 (II) Loading extension GLX (II) LoadModule: "record" (II) Loading /usr/X11R6/lib/modules/extensions/librecord.a (II) Module record: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.13.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.1 (II) Loading extension RECORD (II) LoadModule: "freetype" (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a (II) Module freetype: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.1.10 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.3 (II) Loading font FreeType (II) LoadModule: "type1" (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a (II) Module type1: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.1 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.3 (II) Loading font Type1 (II) Loading font CID (II) LoadModule: "savage" (II) Loading /usr/X11R6/lib/modules/drivers/savage_drv.o (II) Module savage: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.1.20 Module class: XFree86 Video Driver ABI class: XFree86 Video Driver, version 0.5 (II) LoadModule: "mouse" (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o (II) Module mouse: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 Module class: XFree86 XInput Driver ABI class: XFree86 XInput driver, version 0.3 (II) SAVAGE: driver (version 1.1.20) for S3 Savage chipsets: Savage4, Savage3D, Savage3D-MV, Savage2000, Savage/MX-MV, Savage/MX, Savage/IX-MV, Savage/IX, ProSavage PM133, ProSavage KM133, ProSavage PN133, ProSavage KN133, SuperSavage/MX 128, SuperSavage/MX 64, SuperSavage/MX 64C, SuperSavage/IX 128, SuperSavage/IX 128, SuperSavage/IX 64, SuperSavage/IX 64, SuperSavage/IXC 64, SuperSavage/IXC 64 (II) Primary Device is: PCI 01:00:0 (--) Assigning device section with no busID to primary device (--) Chipset Savage4 found (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0xdf001000 - 0xdf0010ff (0x100) MX[B] [6] -1 0xdf000000 - 0xdf0000ff (0x100) MX[B] [7] -1 0xd8000000 - 0xdbffffff (0x4000000) MX[B] [8] -1 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B) [9] -1 0xdd000000 - 0xdd07ffff (0x80000) MX[B](B) [10] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] [11] -1 0x00000000 - 0x000000ff (0x100) IX[B] [12] -1 0x0000ec00 - 0x0000ecff (0x100) IX[B] [13] -1 0x0000e800 - 0x0000e8ff (0x100) IX[B] [14] -1 0x0000e400 - 0x0000e41f (0x20) IX[B] [15] -1 0x0000e000 - 0x0000e00f (0x10) IX[B] (II) resource ranges after probing: [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0xdf001000 - 0xdf0010ff (0x100) MX[B] [6] -1 0xdf000000 - 0xdf0000ff (0x100) MX[B] [7] -1 0xd8000000 - 0xdbffffff (0x4000000) MX[B] [8] -1 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B) [9] -1 0xdd000000 - 0xdd07ffff (0x80000) MX[B](B) [10] 0 0x000a0000 - 0x000affff (0x10000) MS[B] [11] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [12] 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [13] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] [14] -1 0x00000000 - 0x000000ff (0x100) IX[B] [15] -1 0x0000ec00 - 0x0000ecff (0x100) IX[B] [16] -1 0x0000e800 - 0x0000e8ff (0x100) IX[B] [17] -1 0x0000e400 - 0x0000e41f (0x20) IX[B] [18] -1 0x0000e000 - 0x0000e00f (0x10) IX[B] [19] 0 0x000003b0 - 0x000003bb (0xc) IS[B] [20] 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/X11R6/lib/modules/libvgahw.a (II) Module vgahw: vendor="The XFree86 Project" compiled for 4.2.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.5 (**) SAVAGE(0): Depth 8, (--) framebuffer bpp 8 (==) SAVAGE(0): Default visual is PseudoColor (==) SAVAGE(0): Using HW cursor (==) SAVAGE(0): Using video BIOS to set modes (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /usr/X11R6/lib/modules/linux/libint10.a (II) Module int10: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.5 (II) SAVAGE(0): Primary V_BIOS segment is: 0xc000 (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Loading /usr/X11R6/lib/modules/libvbe.a (II) Module vbe: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.5 (II) SAVAGE(0): VESA BIOS detected (II) SAVAGE(0): VESA VBE Version 2.0 (II) SAVAGE(0): VESA VBE Total Mem: 16384 kB (II) SAVAGE(0): VESA VBE OEM: S3 Incorporated. Savage4 (II) SAVAGE(0): VESA VBE OEM Software Rev: 1.1 (II) SAVAGE(0): VESA VBE OEM Vendor: S3 Incorporated. (II) SAVAGE(0): VESA VBE OEM Product: Savage4 (II) SAVAGE(0): VESA VBE OEM Product Rev: Rev B (--) SAVAGE(0): Chip: id 8a22, "Savage4" (--) SAVAGE(0): Engine: "Savage4" (--) SAVAGE(0): mapping MMIO @ 0xdd000000 with size 0x80000 (II) SAVAGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (II) SAVAGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (II) SAVAGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (==) SAVAGE(0): Using gamma correction (1.0, 1.0, 1.0) (**) SAVAGE(0): videoram = 16384k (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Loading /usr/X11R6/lib/modules/libddc.a (II) Module ddc: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.5 (--) SAVAGE(0): No DDC signal (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Loading /usr/X11R6/lib/modules/libi2c.a (II) Module i2c: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.2.0 ABI class: XFree86 Video Driver, version 0.5 (II) SAVAGE(0): I2C bus "I2C bus" initialized. (II) SAVAGE(0): I2C device "I2C bus:ddc2" registered. (II) SAVAGE(0): I2C device "I2C bus:ddc2" removed. (--) SAVAGE(0): Detected current MCLK value of 143.182 MHz (II) SAVAGE(0): Monitor0: Using hsync range of 31.50-48.50 kHz (II) SAVAGE(0): Monitor0: Using vrefresh range of 50.00-70.00 Hz (II) SAVAGE(0): Clock range: 10.00 to 250.00 MHz (II) SAVAGE(0): Not using mode "1400x1050" (hsync out of range) (II) SAVAGE(0): Not using mode "1400x1050" (hsync out of range) (II) SAVAGE(0): Not using mode "1400x1050" (hsync out of range) (II) SAVAGE(0): Not using mode "1400x1050" (hsync out of range) (II) SAVAGE(0): Not using default mode "640x350" (vrefresh out of range) (II) SAVAGE(0): Not using default mode "320x175" (vrefresh out of range) (II) SAVAGE(0): Not using default mode "640x400" (vrefresh out of range) (II) SAVAGE(0): Not using default mode "320x200" (vrefresh out of range) (II) SAVAGE(0): Not using default mode "720x400" (vrefresh out of range) (II) SAVAGE(0): Not using default mode "360x200" (vrefresh out of range) (II) SAVAGE(0): Not using default mode "640x480" (vrefresh out of range) (II) SAVAGE(0): Not using default mode "320x240" (vrefresh out of range) (II) SAVAGE(0): Not using default mode "640x480" (vrefresh out of range) (II) SAVAGE(0): Not using default mode "320x240" (vrefresh out of range) (II) SAVAGE(0): Not using default mode "640x480" (vrefresh out of range) (II) SAVAGE(0): Not using default mode "320x240" (vrefresh out of range) (II) SAVAGE(0): Not using default mode "800x600" (vrefresh out of range) (II) SAVAGE(0): Not using default mode "400x300" (vrefresh out of range) (II) SAVAGE(0): Not using default mode "800x600" (vrefresh out of range) (II) SAVAGE(0): Not using default mode "400x300" (vrefresh out of range) (II) SAVAGE(0): Not using default mode "800x600" (hsync out of range) (II) SAVAGE(0): Not using default mode "400x300" (hsync out of range) (II) SAVAGE(0): Not using default mode "1024x768" (vrefresh out of range) (II) SAVAGE(0): Not using default mode "512x384" (vrefresh out of range) (II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range) (II) SAVAGE(0): Not using default mode "512x384" (hsync out of range) (II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range) (II) SAVAGE(0): Not using default mode "512x384" (hsync out of range) (II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range) (II) SAVAGE(0): Not using default mode "512x384" (hsync out of range) (II) SAVAGE(0): Not using default mode "1152x864" (hsync out of range) (II) SAVAGE(0): Not using default mode "576x432" (hsync out of range) (II) SAVAGE(0): Not using default mode "1280x960" (hsync out of range) (II) SAVAGE(0): Not using default mode "640x480" (hsync out of range) (II) SAVAGE(0): Not using default mode "1280x960" (hsync out of range) (II) SAVAGE(0): Not using default mode "640x480" (hsync out of range) (II) SAVAGE(0): Not using default mode "1280x1024" (hsync out of range) (II) SAVAGE(0): Not using default mode "640x512" (hsync out of range) (II) SAVAGE(0): Not using default mode "1280x1024" (hsync out of range) (II) SAVAGE(0): Not using default mode "640x512" (hsync out of range) (II) SAVAGE(0): Not using default mode "1280x1024" (hsync out of range) (II) SAVAGE(0): Not using default mode "640x512" (hsync out of range) (II) SAVAGE(0): Not using default mode "1600x1200" (hsync out of range) (II) SAVAGE(0): Not using default mode "800x600" (hsync out of range) (II) SAVAGE(0): Not using default mode "1600x1200" (hsync out of range) (II) SAVAGE(0): Not using default mode "800x600" (hsync out of range) (II) SAVAGE(0): Not using default mode "1600x1200" (hsync out of range) (II) SAVAGE(0): Not using default mode "800x600" (hsync out of range) (II) SAVAGE(0): Not using default mode "1600x1200" (hsync out of range) (II) SAVAGE(0): Not using default mode "800x600" (hsync out of range) (II) SAVAGE(0): Not using default mode "1600x1200" (hsync out of range) (II) SAVAGE(0): Not using default mode "800x600" (hsync out of range) (II) SAVAGE(0): Not using default mode "1792x1344" (hsync out of range) (II) SAVAGE(0): Not using default mode "896x672" (hsync out of range) (II) SAVAGE(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan) (II) SAVAGE(0): Not using default mode "896x672" (hsync out of range) (II) SAVAGE(0): Not using default mode "1856x1392" (hsync out of range) (II) SAVAGE(0): Not using default mode "928x696" (hsync out of range) (II) SAVAGE(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan) (II) SAVAGE(0): Not using default mode "928x696" (hsync out of range) (II) SAVAGE(0): Not using default mode "1920x1440" (hsync out of range) (II) SAVAGE(0): Not using default mode "960x720" (hsync out of range) (II) SAVAGE(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan) (II) SAVAGE(0): Not using default mode "960x720" (hsync out of range) (II) SAVAGE(0): Not using default mode "832x624" (hsync out of range) (II) SAVAGE(0): Not using default mode "416x312" (hsync out of range) (II) SAVAGE(0): Not using default mode "1152x864" (hsync out of range) (II) SAVAGE(0): Not using default mode "576x432" (hsync out of range) (II) SAVAGE(0): Not using default mode "700x525" (hsync out of range) (II) SAVAGE(0): Not using default mode "700x525" (hsync out of range) (II) SAVAGE(0): Not using default mode "700x525" (hsync out of range) (II) SAVAGE(0): Not using default mode "700x525" (hsync out of range) (II) SAVAGE(0): Not using default mode "1600x1024" (hsync out of range) (II) SAVAGE(0): Not using default mode "800x512" (hsync out of range) (II) SAVAGE(0): Not using default mode "1920x1200" (hsync out of range) (II) SAVAGE(0): Not using default mode "960x600" (hsync out of range) (--) SAVAGE(0): Found 13 modes at this depth: [12e] 320 x 200, 70Hz [131] 320 x 240, 85Hz, 75Hz, 72Hz, 60Hz [141] 400 x 300, 85Hz, 75Hz, 72Hz, 60Hz [151] 512 x 384, 85Hz, 75Hz, 70Hz, 60Hz [100] 640 x 400, 85Hz, 70Hz [101] 640 x 480, 160Hz, 85Hz, 75Hz, 72Hz, 60Hz [171] 720 x 480, 60Hz [103] 800 x 600, 160Hz, 85Hz, 75Hz, 72Hz, 60Hz [105] 1024 x 768, 130Hz, 85Hz, 75Hz, 70Hz, 60Hz [161] 1152 x 864, 75Hz [107] 1280 x 1024, 100Hz, 85Hz, 75Hz, 60Hz [120] 1600 x 1200, 85Hz, 75Hz, 60Hz [136] 1920 x 1440, 60Hz (--) SAVAGE(0): Virtual size is 800x600 (pitch 800) (**) SAVAGE(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz (II) SAVAGE(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (**) SAVAGE(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz (II) SAVAGE(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (==) SAVAGE(0): DPI set to (75, 75) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/X11R6/lib/modules/libfb.a (II) Module fb: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 ABI class: XFree86 ANSI C Emulation, version 0.1 (II) Loading sub module "xaa" (II) LoadModule: "xaa" (II) Loading /usr/X11R6/lib/modules/libxaa.a (II) Module xaa: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.5 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Loading /usr/X11R6/lib/modules/libramdac.a (II) Module ramdac: vendor="The XFree86 Project" compiled for 4.2.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.5 (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] 0 0xd0000000 - 0xd7ffffff (0x8000000) MS[B] [1] 0 0xdd000000 - 0xdd07ffff (0x80000) MS[B] [2] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [3] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [4] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] [5] -1 0x000c0000 - 0x000effff (0x30000) MX[B] [6] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] [7] -1 0xdf001000 - 0xdf0010ff (0x100) MX[B] [8] -1 0xdf000000 - 0xdf0000ff (0x100) MX[B] [9] -1 0xd8000000 - 0xdbffffff (0x4000000) MX[B] [10] -1 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B) [11] -1 0xdd000000 - 0xdd07ffff (0x80000) MX[B](B) [12] 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) [13] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) [14] 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) [15] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] [16] -1 0x00000000 - 0x000000ff (0x100) IX[B] [17] -1 0x0000ec00 - 0x0000ecff (0x100) IX[B] [18] -1 0x0000e800 - 0x0000e8ff (0x100) IX[B] [19] -1 0x0000e400 - 0x0000e41f (0x20) IX[B] [20] -1 0x0000e000 - 0x0000e00f (0x10) IX[B] [21] 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [22] 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Reloading /usr/X11R6/lib/modules/linux/libint10.a (II) SAVAGE(0): initializing int10 (II) SAVAGE(0): Primary V_BIOS segment is: 0xc000 (II) SAVAGE(0): VESA BIOS detected (II) SAVAGE(0): VESA VBE Version 2.0 (II) SAVAGE(0): VESA VBE Total Mem: 16384 kB (II) SAVAGE(0): VESA VBE OEM: S3 Incorporated. Savage4 (II) SAVAGE(0): VESA VBE OEM Software Rev: 1.1 (II) SAVAGE(0): VESA VBE OEM Vendor: S3 Incorporated. (II) SAVAGE(0): VESA VBE OEM Product: Savage4 (II) SAVAGE(0): VESA VBE OEM Product Rev: Rev B (II) SAVAGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (--) SAVAGE(0): mapping framebuffer @ 0xd0000000 with size 0x1000000 (==) SAVAGE(0): Write-combining range (0xd0000000,0x1000000) (--) SAVAGE(0): Chose mode 103 at 60Hz. (II) SAVAGE(0): Using 1447 lines for offscreen memory. (II) SAVAGE(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles 8x8 mono pattern filled rectangles 8x8 color pattern filled rectangles Indirect CPU to Screen color expansion Solid Lines Image Writes Offscreen Pixmaps Setting up tile and stipple cache: 32 128x128 slots 8 256x256 slots 32 8x8 color pattern slots (==) SAVAGE(0): Backing store disabled (**) Option "dpms" (**) SAVAGE(0): DPMS enabled (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension LBX (II) Initializing built-in extension XC-APPGROUP (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFree86-Bigfont (II) Initializing built-in extension RENDER (**) Option "Protocol" "Microsoft" (**) Mouse0: Protocol: "Microsoft" (**) Option "CorePointer" (**) Mouse0: Core Pointer (**) Option "Device" "/dev/ttyS0" (**) Option "BaudRate" "1200" (**) Option "StopBits" "1" (**) Option "DataBits" "7" (**) Option "Parity" "None" (**) Option "Vmin" "1" (**) Option "Vtime" "0" (**) Option "FlowControl" "None" (**) Option "Emulate3Buttons" "yes" (**) Mouse0: Emulate3Buttons, Emulate3Timeout: 50 (**) Option "ZAxisMapping" "4 5" (**) Mouse0: ZAxisMapping: buttons 4 and 5 (**) Mouse0: Buttons: 5 (**) Mouse0: BaudRate: 1200 (II) Keyboard "Keyboard0" handled by legacy driver (**) Option "Protocol" "IMPS/2" (**) DevInputMice: Protocol: "IMPS/2" (**) Option "AlwaysCore" (**) DevInputMice: always reports core events (**) Option "Device" "/dev/input/mice" (**) Option "Emulate3Buttons" "no" (**) Option "ZAxisMapping" "4 5" (**) DevInputMice: ZAxisMapping: buttons 4 and 5 (**) DevInputMice: Buttons: 5 (II) XINPUT: Adding extended input device "DevInputMice" (type: MOUSE) (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE) (**) Option "BaudRate" "1200" (II) SAVAGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
__________________
Napoleon, don't be jealous that I've been chatting online with babes all day | Ugh! Gross! Freakin' idiot!
|
|
|
22-03-2003, 09:42
|
|
|
|
en met dit progje zou ik het eea ook moeten kunnen instellen:
redhat-config-xfree86 dan krijg ik wel een gui te zien, en kan ik mijn resolutie enz instellen, gaat allemaal gewoon goed. maar zodra ik startx start, gebeurd er op een gegeven moment niks meer
__________________
Napoleon, don't be jealous that I've been chatting online with babes all day | Ugh! Gross! Freakin' idiot!
|
|
22-03-2003, 10:30
|
|
|
Het wordt mij niet helemaal duidelijk of je nu wel of geen beeld te zien krijgt. Als ik je log zo zie, lijkt ie namelijk een heleboel resoluties met frequenties te proben die gewoon niet werken, omdat de ranges niet goed ingesteld zijn.
Je monitor vliegt niet naar standby bij 't starten van X? Het zou kunnen dat X een resolutie met verticale en horizontale refresh probeert te starten, die je monitor niet aankan. Weet je zeker dat je horizrefresh en vertrefresh goed staan ingesteld?
|
|
22-03-2003, 10:49
|
||
|
|
Citaat:
Zodra ik startx start, dan krijg ik het logo te zien van redhat, met een muisaanwijzer die ik ook nog eens kan bewegen. Na dit logo hoort hij het bureaublad enz weer te geven, maar dit weigert hij dus. Hij blijft hangen op de een of andere manier. Vergelijk het een beetje met het scherm: Windows word opgestart, en dat er onderin die streepjes heen en weer lopen als teken dat hij bezig is, en op eens stoppen die streepjes en er gebeurd niks meer. Dat is wat er dus gebeurd. En het lijkt me dat mijn instellingen wel goed zijn, want het heeft altijd goed gewerkt. Ik heb geen enkele instellingen veranderd, maar van het een op het andere moment werkt het gewoon niet meer...
__________________
Napoleon, don't be jealous that I've been chatting online with babes all day | Ugh! Gross! Freakin' idiot!
|
|
|
22-03-2003, 11:30
|
|
|
|
Hm dat klinkt eigenlijk eerder of je window manager niet boot, X lijkt wel goed te werken dus.
Heb je al geprobeerd wat ******** zei?
|
| Advertentie |
|
|
 |
«
Vorige topic
|
Volgende topic
»
|
|
Soortgelijke topics
|
||||
| Forum | Topic | Reacties | Laatste bericht | |
| Software & Hardware |
[Linux]Audio- en Videokaartdriver installeren TopDrop | 9 | 20-03-2006 20:14 | |
| Software & Hardware |
[Linux] Vragen en onduidelijkheden Krekker | 20 | 19-05-2005 21:04 | |
| Software & Hardware |
[Algemeen] Waarom Linux? Optima | 50 | 07-02-2005 19:11 | |
| Software & Hardware |
[Linux] Driver-problemen Verwijderd | 11 | 05-06-2004 17:07 | |
| Nieuws, Achtergronden & Wetenschap |
Rapport: "Mac heeft 'slimmere' gebruikers dan PC" bam | 37 | 28-07-2002 14:57 | |
| Software & Hardware |
[Linux] PCI: Cannot allocate resource region F10®!@n | 17 | 10-01-2002 15:56 | |
Alle tijden zijn GMT +1. Het is nu 06:14.
Adverteren